6000W Pure Sine Wave Power Inverter 12V DC to 120V AC Converter with LCD Display - Solar Charger for Home, RV, Camping & Car Power Supply (Ideal for Outdoor Adventures & Emergency Backup)

COMBINED 3200W, 12V & 24V 3200W REVIEWS....LATEST PURCHASE - 3200W, 12V REVIEW:New control panel layout, greater efficiency, & new LCD Display provides more information with less standby power consumption!!! Standby current draw is less than 0.5% of the rated power. These inverters are workhorses, that power up all of my high induction surge load equipment with no issues. Confirmed, clean, pure sine wave output.Same AC voltage as my utility company provides on the line. Backup power will not be a problem, and these are easily portable. Plan to use this 12v model as a portable unit between the house, shop, and truck.These 3200w units are beasts, and the best high frequency inverters I have seen and used. Best circuitry using the best components at an excellent price.This 12v model came with positive and negative cables that are approx. 19” long, and comprised of 3x, 9.2mm2 cables crimped together. Crimped cable lugs are thicker nickel-plated copper. These are much better cables and lugs than what came with the 24v inverter. But I will still be switching out to larger cables and thicker crimped plated copper lugs for my application.Highly recommend!!!_____________________ORIGINAL 3200W, 24V REVIEW:The 2 old voltage LED’s for DC Input and AC Output are gone. Replaced with one LCD display that provides more information. Besides the DC and AC voltages, it also displays Frequency in Hz, battery state of charge graphic, alarm code(s), and current wattage. And doing this at a lower power consumption, making the idle current less, and the efficiency percentage higher.Purchased this for a back-up emergency power. The highest wattage device I need to power is a 2.5HP air compressor. The compressor started fine with the initial start surge and ran with no issues. No issues with anything else I tried to run with it. The most wattage I pushed with it continuity so far is 2400W. Only plan to run this at 80% capacity at the most.The build quality is excellent.Two major dislikes I have: 1 – The owner’s manual is actually a very limited generic all-in-one, of the manufacture’s models, general specs. More of an advertisement than an owner’s manual. Manufactures website is the same. They can do better for the consumers purchasing their products. 2 – Both the positive and negative cables provided are comprised of 2, 10mm2 cables crimped together. This is just slightly better than the equivalent to 6 AWG. Crimped cable lugs are very thin copper, which I do not recommend using. I make my own cables using larger wire and lugs. This is a mute issue on my end, but others need to be aware of this. I believe the manufacture should provide a minimum of (or the equivalent to) 2 AWG positive and negative cables.Even with the dislikes, would I buy this again? Absolutely!!! This inverter is a solidly built beast.