Himalaya High Pressure Airless Paint Sprayer - 3000PSI, 5/8HP, 650W Professional Paint Spray Gun for Home, Exterior, Fences, Cabinets & DIY Projects | Contractor Grade Painting Equipment for Walls, Furniture & Large Surfaces

I painted my 2 story cedar clapboard house with a 4" roller about 5 years ago. If you have ever done this sort of thing before, you know that it takes a certain amount of physical effort to get a full coat of paint up into the horizontal corners of each clapboard. My back, painting arm, and shoulder were very sore by the time that I was done so I vowed to find an easier way.I considered a Wagner cup sprayer but the Amazon reviews were average to very poor. I considered a Graco cup sprayer which had much better reviews. I actually checked one out in person at a big box store but it was relatively heavy even when it was not filled with paint. I did not want to trade a sore arm with a brush for a sore arm with a cup sprayer.This HIMARAYA Airless sprayer is an entry level airless sprayer that produces the results of a higher end sprayer. A few observations for other novice painters:GENERAL OBSERVATIONS:1. The sprayer is very well made and durable despite its light weight. I imagine that a full cup sprayer probably would have weighed 5 or 6 pounds. This sprayer gun probably weighs a half pound or less.2. DO NOT SKIP THE OWNERS MANUAL. You will need to invest some time in learning how to operate this machine. The manual is very easy to understand and it goes through each step with helpful illustrations.3. Set-up takes a lot longer than brush or roller painting. As long as your surface is clean, you can start painting with a brush or a roller right away. Sprayers require you to cover any and everything that you do not want to get overspray on. I actually bought a very lightweight aluminum shield (36") at a big box store for less than $18. This was very helpful. I recommend getting the smaller version as well. The large one was too big to fit the corners of smaller windows. This can save you set-up time if you do not mind razoring off any small amounts of overspray once it dries.4. Once you are properly set-up, the actual spraying goes VERY QUICKLY! I painted a 12' x 20' shed in less than 30 minutes. I did what I think is a very good job even though I never used a sprayer before in my life. Given how rough and "thirsty" the siding was, I believe that it would have taken an entire day with a brush or roller.5. You will use more paint than you are used to. I suspect that expert users can minimize paint loss more easily than I can but I feel like I used 20% more paint than I was expecting.6. The online picture does not look like it but this sprayer will accept the more cost effective 5 gallon buckets of paint. This prevents you from having to frequently change smaller cans and it prevents paint loss from leaving all the smidges of unused paint behind. (I saved the cans for touch-up jobs that can be handled with a quick brush.)7. Since I was painting outside, I placed both the sprayer and the paint can on a 2' x 4' piece of plywood. This provided a more stable platform for the sprayer and minimized chances of the can getting kicked, falling over, etc.PROS:1. Great value for the money from a respected name in the industry. I paid $189 for this unit with free shipping and obviously no taxes. I saw the similar unit at a big box store for $299.2. Sturdy and durable with easy to understand features. Will withstand all respectful wear and tear.3. Paint gun is extremely lightweight and easy to use. This said, it is made completely from metal so it is very, very durable.4. Produces great results with minimal effort.5. Like all sprayers, it does a great job of reaching areas that are not readily accessible with brushes or rollers. Gutters were an absolute SNAP with superior results to boot!6. If you are using a heavy paint like exterior latex then make sure that you water down the paint. If it is too thick then the sprayer will not be able to draw the paint and it will lose suction. A LITTLE WATER GOES A LONG WAY. Add a few ounces to a gallon of paint to begin with. That worked for me. It is easy to learn as you go but always start with less water than you think you need and work your way up.CONS:1. Sprayer loses suction when you draw down to about 2" of paint remaining in the can. I have to wonder out loud if a stronger motor would have been able to draw down further prior to losing suction. I got around this by moving on to the next can and then pouring the balance of the previous can into the can currently in use (once there was enough room). Keep this in mind if your job hovers around needing a full gallon. You will need to manage your paint supply in order to ensure that you will be able to draw adequate suction until your job is done. (So maybe you could buy an extra quart or a full gallon can if you think that you will be able to use it in the future.)2. As with any sprayer, set-up and clean-up take longer than brush, roller, or cup sprayer. Even so, I still saved days in completing my house and saved physical wear and tear on my body as well.3. The sprayer is light and easy to move around. Even so, I think that I might have appreciated a higher end other brand sprayer with wheels. Not a big concern but something to consider if you are thinking about spending a little extra.All in all, this is one of the best purchases that I have made in a while. I am happy to give this tool 5 stars.