High Pressure Autoclave Reactor 50ML - 304 Stainless Steel PPL Lined Hydrothermal Synthesis Vessel, 250℃ & 3MPa for Lab Research, Chemical Digestion, Material Testing - Perfect for Crystal Growth & Nanomaterial Synthesis

Max temperature: 280C, Security temperature: 250CMax pressure: 3MPa, Security pressure: 2MPaHeating, cooling rate: 5 c / minMaterial: 304 stainless steel reactor & PPL liningSuggested Heater: It is recommended use a heater with programmed heating, muffle furnace is not recommended, becasue of temperature overshooting and temperature heating rate exceed the limit will lead to melting of the lining. B00LQ1GUBU Magnetic Stirring Heating mantle Heating Power: 180-2200W, Max heating temperature: 380CCan be used in experiments with reaction temperature below 380C. The safe temperature of the reactor should be strictly followed in the use of the reactor. Customized products - customized according to the size of the reactor B07JQTTXQ2 PTFE/PPL The liner can only match the corresponding capacity reactor kettle Interchangeable linings of the same size No poison - Physical inert Non adhesion - the smallest surface tension in solid materials High lubrication - the lowest coefficient of friction in solid materials High temperature and low temperature resistance - the working temperature can reach 250 degrees centigrade, even if the temperature drops to -196 C, it can maintain 5% elongation Corrosion resistance - almost insoluble in all solvents How to choose the reactor? Capacity, pressure, temperature, whether acid and alkali resistant, safety issues, etc First confirm the capacity of your reaction solution (if your reaction solution is 30ml, it is recommended to buy a 100ml reaction kettle, the reaction kettle should be added with 1/3 of the solution when it is used for the first time) Then confirm the temperature and pressure you need (you can choose according to the applicable range of each reactor) Safety issues--high pressure and high temperature reactors will be equipped with pressure relief holes or explosion-proof discs. This reactor is the smallest range in our store, so there are no pressure relief holes. Overtemperature and pressure will melt the lining, but the stainless steel shell will not explode. Whether it can react with acid-base solution--PTFE liner can be used to react acid-base solution, but PPL liner cannot. Can I customize the reactor--Yes, we provide customized services, but this requires additional customization time. 7mm Thickening PTFE Lining Synthesis Autoclave Hydrothermal Synthesis Autoclave Reactor 100ml Gas adding Reactor Explosion-proof Hydrothermal Reactor Magnetic Stirring Reactor Add to Cart Buying Options Add to Cart Buying Options Add to Cart Customer Reviews 5.0 out of 5 stars 4 — 5.0 out of 5 stars 3 — — Price $225.00$225.00 — no data $489.00$489.00 — no data $957.00$957.00 Working temperature -200 ~ 240℃ -200 ~ 240℃ Max: 220℃ Max: 260℃ Max: 200℃ (with heating) Max Working pressure 6MPa 6MPa 6MPa (gauge) 10MPa 3MPa Heating, cooling rate 5 c / min 5 c / min 5 c / min 5 c / min 5 c / min Explosion-proof With pressure relief hole With pressure relief hole With pressure relief hole With pressure relief holes, safety valves NO Contrast Higher tolerance to temperature and pressure Higher tolerance to temperature and pressure Hydrogen can be added Explosion-proof, with quick-opening structure Heating and magnetic stirring, surface temperature up to 380 C Operation Method Pour the reactant into the PTFE liner and ensure that the feeding is less than 80%, and for the first time must less than 30% You should put the corrosive reaction into PTFE bush, be assured kettle body from corrosion. Install the kettle body correctly and tighten the kettle cover with the booster rod. Placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature). At the end of the reaction, the cooling rate should be ≤ 5c/min strictly in order to facilitate the safety and reactor life.